Bestdvdripper's Blog

Aiprosoft DVD to iPhone Converter

Aiprosoft DVD to iPhone Converter is the Best DVD to iPhone Converter program. It can convert DVD to iPhone MP4, MOV, H.264 etc video and MP3, M4A, etc audio formats easily and fast, also owns the way to convert DVD to iPhone 3G, iPhone 3GS, iPhone 4. This DVD to iPhone Converter also acts as DVD to iPod conversion software to convert DVD to iPod.

Compared with other DVD to iPhone Converter programs on the market, Aiprosoft DVD to iPhone Converter has the highest conversion speed (>400%) and the best image quality. With this best DVD to iPhone Converter, you can also easily customize the output file to cater for your personal need, such as setting video/audio bitrate, ripping any segment of a DVD, trimming video, cropping movie, setting video effect, selecting target subtitle and audio track, previewing both the original and output video, etc.

This article will show you how to convert dvd to iphone by using Aiprosoft DVD to iPhone Converter

Step 0: Install and run Aiprosoft DVD to iPhone Converter.

Step 1: Import DVD
Place the DVD into your DVD drive and click the “Load DVD” button to load DVD.

Tips: This DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.

Video settings:
Select the output video format you want from the “Profile” drop-down list.

Tips:

1: You can also select Audio Track and Subtitle from their respectively drop-down list.
2: If you like the current image of the video you can use the “Snapshot” opinion. Just click the “Snapshot” button the image will be saved and you can click the “File” next to “Snapshot” button to open your picture. You can select the destination of the picture by clicking the “Preference” button.
3: If you want to merge the selected contents into one file you can check the “merge into one file” option. As default the merged file is named after the first selected file (either a title or a chapter)
4: You can click the “Settings” button to set your video parameters.
In the Video Settings, you can select Encoder, Frame Rate, Resolution and Bitrate for your movie.
In the Audio Settings, you can select Encoder, Channels, Bitrate and Sample Rate for your movie.

when you choose the specific settings, the lower window will show the “help” to explain the meanings of each setting.

Step 2: Secelt the Profile
You can select the output video file from the Profile drop-down list.

Step 3: Choose Output Destination

Step 4: Start conversion
Click the “GO” button to start your conversion and in a short while it will be finished.

MySpace is a free online community composed of personal profiles aimed foremostly at a younger membership. A MySpace profile typically includes a digital photo and in-depth information about personal interests. The amount of detail included in the profile is up to the user and submitted voluntarily. MySpace policy requires users be at least 14 years of age to join. Members routinely send each other messages and “network” or socialize within the MySpace community.

Many people want to upload their DVD to myspace and share them with their friends. But DVD is .VOB format which can not be accepted by myspace (support .FLV Video). So people should use a third-party software to convert their dvd to myspace video. Now Aiprosoft DVD Ripper is regarded as the best dvd ripping software on the market.

Here is a guide for you, hope it can help.

Step 1: Become familiar to Aiprosoft DVD to Myspace converter
Download the Aiprosoft DVD ripper , install it and start operation

Step 2: Load DVD Movie to the program
Click the “Add… ” Button and browse your computer, find the DVD folder of the movie you want to add.

Step 3: Select DVD YouTube output format
Select output format.

Step 4: Configure output settings
You can select the settings’ parameters as you want

In addition: Click “Edit” button, you will do all editing process including crop, effect, trim, watermark, in a new interface and you can preview all changes clearly.

Step 5: Accomplish DVD to Myspace conversion
Click the “GO” button, you can get the output files as you want.

Tip:
If you want to upload a clip of your dvd movie to myspace, you can use the “Trim” function.

You can drag the left-bar and right-bar to the right position you want to cut, or you will set the “Start Time” and “End Time” to get any clip of your DVD Movie.

YouTube is a video sharing website on which users can upload and share videos with friends, family and people all over the world. Many fans have their DVD movies but need to convert DVD to YouTube to share with their friends, but the problem is they don’t know how to upload DVD to YouTube.

This article will cover the steps to convert DVD to YouTube and upload DVD to YouTube using iSkysoft DVD Ripper. If you need to edit DVD using Windows Movie Maker before sharing on YouTube, you can also use this DVD YouTube solution to transfer your DVD to video formats which are editable to movie marker.

Before we move to the detail guide on DVD to YouTube, we need to know that YouTube supports videos within 10 minutes in AVI, MOV, WMV, MPEG, and MP4, etc. So, the first thing is to rip and convert DVD to YouTube video formats, and then cut them into individual clips and put them onto YouTube.

Aiprosoft is the powerful DVD Ripper which can save your favorite DVD Movie to hard drive or computer and rip DVD to all various video formats or audio formats for Windows system(Windows 7 included). So Aiprosoft DVD ripper is helpful to upload DVD to YouTube.

Here is a guide for you, hope it can help.

Step 1: Become familiar to Aiprosoft DVD to YouTube converter
Download the Aiprosoft DVD ripper , install it and start operation

Step 2: Load DVD Movie to the program
Click the “Add… ” Button and browse your computer, find the DVD folder of the movie you want to add.

Step 3: Select DVD YouTube output format
Select output format.

Step 4: Configure output settings
You can select the settings’ parameters as you want

In addition: Click “Edit” button, you will do all editing process including crop, effect, trim, watermark, in a new interface and you can preview all changes clearly.

Step 5: Accomplish DVD to YouTube conversion
Click the “GO” button, you can get the output files as you want.

If you want to edit a DVD movie with Windows Movie Maker but get frustrated with the DVD format, this guide may help you solve the problem.

Before you get started, it will be helpful if you learn something about the DVD and WMM.
General DVDs have CSS copy protection in MPEG-2 or VOB format.
(Windows) Windows Movie Maker supports WMV, AVI and MPG video files.

How to put DVD movie into Windows Movie Maker

Step1. To put a DVD movie into Windows Movie Maker

you have to rip your DVD to WMV or AVI video first, and then you can load it into Windows Movie Maker. I’d prefer using Aiprosoft DVD Ripper to do this.
Just free download Aiprosoft DVD Ripper

Then install and run it, put your DVD disc into your DVD drive, click “Load DVD” to locate your DVD file and import it, or load it by clicking “Load File” to add DVD IFO file. (This DVD Ripper can rip copyright protected DVD movies, but you should remember that it’s illegal rip DVD for any business purposes)

Step2. Select output format and subtitle
After you load the DVD files, click the format drop-down list to select “WMV – Windows Media Video (*.wmv)” or “AVI – Audio Video Interleaved (*.avi)” as the output format. A regular DVD movie has multiple subtitles and audio tracks, and you can select the right one for you. If you just want a certain part of the DVD movie, you can click “trim” to cut the DVD movie. Just drag the timeline bar to set the start and end time, and then blue line will be the captured parts.

For advanced user, if you want to output higher quality video, click the “Settings” button to open the panel, here you can customize video bitrate, audio bitrate, resolution, framerate, etc. Higher bitrate will result in bigger file size.

Step3. Start to convert
After the above steps, you just need to click “Go” and wait for the conversion to be finished. It takes about 40 minutes to convert a common two hours DVD movie.

Step4. Edit DVD with Windows Movie Maker (optional)
Run Windows Movie Maker, in the “Movie Task” bar, click “Add Video” to browse your computer and located the converted files, and then you can start to make personal movies.

Tips: Many users may wonder how they can convert Windows Movie Maker file (*.MSWMM) to other video format. Actually, A *.MSWMM file is not a video file. It is a project file of Movie Maker (more like a record file). You have to open this file in Windows Movie Maker and save the movie to your computer: Go to Movie Tasks bar > Finish Movie > Save to my computer. After that you will have a WMV file which can be converted to another video format or burned to DVD.

Now many people have iPad/iPod/iPhone and other pupular portable players.
More and more want to watch their DVD Movie on their portable media players anywhere and anytime.

But DVD is .VOB format which can not be supported by portable devices.

This article introduces some useful tools to help you put your dvd on iPad/iPod/iPhone.
1: DVD to iPad Converter

Aiprosoft DVD to iPad Converter is specifically designed for Apple iPad users to watch DVD movies on your iPad’s Multi-Touch screen. With this DVD to iPad converter, you can rip DVD to iPad H.264 (SD and HD), MP4, and MPEG-4 videos in different resolutions (1280*720, 720*480, 640*480). All conversions are optimized to offer you the best possible DVD movie experience on your iPad.

Apart from converting DVD to iPad videos, Aiprosoft DVD to iPad Converter allows you to rip DVD audio to iPad MP3, AAC and M4A audios; customize conversion parameters, split files, convert a video segment, preview movies, select audio and subtitles, capture video images, and specify the output file size.

Note:
If you want to watch popular video on your iPad, you can use iPad Video Converter. iPad Converter Suite is also available which is the pack of dvd to ipad converter and iPad video converter.

2: DVD to iPod Converter

Aiprosoft DVD to iPod Converter is the most professional DVD to iPod converter software to DVD to iPod Touch, DVD to iPod Nano, DVD to iPod Classic. You can easily convert almost all kinds of DVDs to iPod MP4 video, MP4 AVC video, MOV, M4V and iPod MP3 etc audio with the latest MPEG-4 video encoding technology.

Note:
If you want to watch popular video on your iPod, you can use iPod Video Converter. DVD to iPod Converter Suite is also available which is the pack of dvd to ipod converter and iPod video converter.

3: DVD to iPhone Converter

Aiprosoft DVD to iPhone Converter is the Best DVD to iPhone Converter program. It can convert DVD to iPhone MP4, MOV, H.264 etc video and MP3, M4A, etc audio formats easily and fast, also owns the way to convert DVD to iPhone 3G, iPhone 3GS, iPhone 4.

Note:
If you want to watch popular video on your iPhone, you can use iPhone Video Converter. DVD to iPhone Converter Suite is also available which is the pack of dvd to iphone converter and iPhone video converter.

Other useful tools for portable media players.
Archos Video Converter
DVD to Creative Zen Converter
Total Video Converter
iPod Touch Video Converter

Now more and more people have iPod,iPhone,PSP,Zune,Creative Zen,Mobile Phone and other digital portable devices.

Many people want to rip their DVD to the formats supported by their portable devices so they can enjoy their DVD movies anywhere and at any time.

This guide shows you how to rip DVD to MP4, AVI, MP3, WMV, WMA, FLV, MKV, MPG, RM, 3GP, etc by using Aiprosoft DVD Ripper.

Step 0: Install and run Aiprosoft DVD Ripper

Step 1: Import DVD
Place the DVD into your DVD drive and click the “Load DVD” button to load DVD.

Tips: This DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.

Video settings:
Select the output video format you want from the “Profile” drop-down list.

Tips:

1: You can also select Audio Track and Subtitle from their respectively drop-down list.

2: If you like the current image of the video you can use the “Snapshot” opinion. Just click the “Snapshot” button the image will be saved and you can click the “File” next to “Snapshot” button to open your picture. You can select the destination of the picture by clicking the “Preference” button.

3: If you want to merge the selected contents into one file you can check the “merge into one file” option. As default the merged file is named after the first selected file (either a title or a chapter)

4: You can click the “Settings” button to set your video parameters.
In the Video Settings, you can select Encoder, Frame Rate, Resolution and Bitrate for your movie.
In the Audio Settings, you can select Encoder, Channels, Bitrate and Sample Rate for your movie.

when you choose the specific settings, the lower window will show the “help” to explain the meanings of each setting.

Step 2: Secelt the Profile
You can select the output video file from the Profile drop-down list.

Step 3: Choose Output Destination

Step 4: Start conversion
Click the “GO” button to start your conversion and in a short while it will be finished.

More tips:

1: Trim Movie
If you just want to convert a clip from your DVD movie, you can click the “Trim” button to open the Trim dialog, you can trim a duration of the selected title or chapter by either dragging the Start Time and End Time sliders or setting the time parameters in each corresponding field.

After you set the trimming time, the length of the captured clip will be shown in the Select Length box for your reference.

2. Movie Effect
If you want to change the original video effect, you can click the Effect icon to set the video brightness, contrast, saturation, etc. You can also set the special effect for your movie to cater to your need.

3. Video Crop
With Aiprosoft DVD Ripper you can remove the black edges around your movie video by checking the “Crop” option, so you can watch your movie on your portable players in full screen.

There are three methods available to crop your video:

Method 1: Crop by selecting a crop mode
Select a crop mode in the crop mode drop-down list and click OK to save the crop. There are three pre-set crop modes
for your choice: No Crop, Cut off top and bottom black edges, Cut off top black edge.

Method 2: Crop by adjusting the crop frame
The crop frame is the dashed line around the movie video. There are four adjustment lines on the crop frame. Each line allows you to crop the movie video from a different position.
To crop your movie video, you can just move your mouse cursor to an adjustment box and drag the crop frame.

Method 3: Crop by setting the crop values
There are four crop values on the lower left part of the crop window: Up, Down, Left and right. You can set each value to crop your movie video, and the crop frame will move accordingly.

Before you start to crop your movie video, you can select an output aspect ratio from the Zoom list. There are four choices available: Full screen, Keep original, 16:9 and 4:3. After you select an output aspect ratio and finish the crop, the result can be previewed in the Preview window of the program main interface.

How to put your favorite DVD movie and video on Archos ?

Aiprosoft DVD to Archos Converter Suite is the pack of Aiprosoft DVD to Archos Converter and Aiprosoft Archos Video Converter.

It can help you rip your dvd movie and converter general video to Archos supported video and audio formats so you can enjoy your dvd or video on your archos easily. Free download this DVD to Archos Converter Suite.

Key Functions:

1. DVD to Archos Ripper
Powerful Archos DVD Converter assists you to convert DVD to Archos 705 WiFi, Archos Gmini XS 100, Archos 605 WiFi, Archos 404 camcorder, Archos 404, Archos 504 etc.

2. Archos Movie Converter
Copy the mainstream audios and videos to Archos by using Aiprosoft Archos Video Converter.

3. Merge, effect, trim, crop –all-round editing functions
Merge several files into one for your successive enjoyment, adjust the DVD movie brightness, contrast, saturation, and volume, get any time length segments from your DVD movie or video files, crop the DVD movie or video files play region and adjust the output aspect ratio with the help of Aiprosoft DVD to Archos Suite.

4. Customize output parameters
Adjust the DVD movie and video Encoder, Resolution, Frame Rate, Bitrate, Sample Rate, Channels. In addition, you can input your own-set Resolution. All the well-customized settings can be saved as user-defined settings for your later use.

5. Take snapshot, set DVD audio track and subtitle
Customizing output video and audio can be done easily by adjusting the settings: select audio track, subtitle, snapshot picture, etc.

6. View the effect of output file immediately
You can preview both your source video/DVD video and the effect of converted video simultaneously in the same window.

7. Fastest conversion speed
Provide the fastest conversion speed (>300%), completely support dual core CPU.

More Suite Tools:
DVD Converter Suite | DVD to iPod Converter Suite | DVD to Creative Zen Converter Suite | DVD to Zune Converter Suite

Now iPad is quite popular among people though it has been sold for only a few months. Every one who got iPad are very proud.

It is also pretty cool to enjoy your dvd or video on your iPad at anywhere such as on the plane, in the bus, in the subway or at your office.

But iPad can not support DVD format and most popular video, so it becomes diffucult for some people to watch dvd and movies on their iPad.

In this article I will show the people how to put dvd and video on iPad with DVD to iPad Converter and iPad Video Converter.

Part One: How to Rip DVD to iPad.
Step 0: Free download DVD to iPad Converter, install and run it.

Step 1: Load DVD. Click “Load DVD” to add your DVD contents.

Step 2: Set output video format.
Click “Profile” button from the drop-down list to select the exact output video format that is the most suitable for your iPad. You can click the “Settings” button to set parameters of your output video such as such as Resolution, Video Bitrate, Frame Rate, Audio Channels, Sample Rate, etc. to get the best video quality as you want.

Step 3: Select the output path by clicking “Browse” button from the line of destination.

Step 4: Click the “Go” button to start the conversion.

Tips:
The two pieces of software have some basically editing functions such as trim, crop, effect,

1. Trim:
Three ways to do trim:
a. Drag the “start scissors bar” button to where you want to start and “end scissors bar” button where you want to end.
b. You can click the “Trim From” button when you want to start the trim during your preview and click “Trim To” button when you want to end.
c. Set the exact “start time” and “end time” at right part of the trim window and click “ok”.

2. Crop:
Three ways to do crop
a. Select one crop mode from the “Crop Mode” drop-list.
b. Dragging crop frame to choose your own crop.
c. Set your own crop value.

3. Effect
Drag the adjustment bar to find your favorite effect of Brightness, Contrast, Saturation and Volume.

4. Merge into one file.
Pick the “Merge into one file” to merge the files you choose into one output file.
Part Two: How to Convert Video to iPad.
Step 0: Free download iPad Video Converter, install and run it.

Step 1: Add video File.
Click “Add File” to add your video contents.

Step 2: Set output video format.
Click “Profile” button from the drop-down list to select the exact output video format that is the most suitable for your iPad. You can click the “Settings” button to set parameters of your output video such as such as Resolution, Video Bitrate, Frame Rate, Audio Channels, Sample Rate, etc. to get the best video quality as you want.

Step 3: Select the output path by clicking “Browse” button from the line of destination.

Step 4: Click the “Start” button to start the conversion.

Now you can also get iPad Converter Suite at a promotion price. This iPad Converter Suite is the pack of DVD to iPad Converter and iPad Video Converter.

This article shows how to rip our protected DVD and Convert geneal Video.

First, it shows people how to rip their protected DVD to AVI, WMV, 3GP, MP4, FLV, MOV, RM, MPEG, DIVX, MKV, MP3, AAC, AC3, WMA, WAV, FLAC, AU and other video/audio formats.

Second, it shows people how to convert almost any video to iPod, iPad, iPhone, PS3, Archos, iRiver, Sansa, Walkman, Blackberry, Nokia, Mobile Phone, Apple TV and other portable devices.

Aiprosoft DVD Converter Suite is the pack of Aiprosoft DVD Ripper and with Aiprosoft Total Video Converter. It can both rip DVD and convert video to general video for almost any portable devices.

Just free download Aiprosoft DVD Converter Suite, install and run it.

Part 1: How to Rip your DVD to AVI/WMV/FLV/MP4/MOV/MP3/AAC/WMA/WAV……
Step 0: run “DVD Ripper” program.
Step 1: Click “Load DVD” button to load your DVD.
This professional DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.

Step 2: Select the output video format you want from the “Profile” drop-down list.
Step 3: Choose your output video destination.
Step 4: Click the “Start” button to start your conversion and In a short while it will be finished.

Tips:
1: Video Effecting
Click the “Effect” button and a dialog pops up, you can set your video effect here.

2: Trim video
Click the “Trim” button and a dialog pops up. You can set the time of the clip here. You can rip any your DVD to YouTube and Myspace supported FLV formats easily. You can also upload only a clip of your DVD movie

3: Crop video
There are two methods available to crop your video: You can crop your video by selec your video mode or set crop values.

4: Capture your favorite picture.
If you like the current image of the video you can use the “Snapshot” opinion.
5: Merge videos into one file.
Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)

Part 2: How to Convert video/audio between almost any video and audio formats.
Step 0: run “Total Video Converter” program.
Step 1: Click the “Add File” to load your video.

Step 2: Select your output video format from the drop-down list.

Tips: Edit your video.
Cut any Clip of your video.

If we want to get only a segment or some clips of our video we can use the “Trim” function. We can drag the slide bar to the correct position or we can set the “Start time” and the “End time” to get the video length you like.
Remove the black edge and get the best aspect ratio.

If we want to put our videos on different portable devices with sorts of aspect ratio we should use the crop function. It can remove the black edge of our video and allow us to adjust the aspect ratio to get the best watching quality.

Join several video files into only one file.
If you can join your many videos into only one file, you can select your videos and then tick the “Merge” functions and then you can join your several videos into only one file.

Capture your favorite image of the video.
In the process of the video playing, if you like one of the picture of the video you can click the “Snapshot” button to get the current image you like.
Step 3: Click the “Browse” to choose a file to put your output video.
Step 4: Click “Start” to start yours conversion.

More Tools:
DVD to Creative Zen Converter | Video to Audio Converter | iPad Video Converter | DVD to iPhone 4 Converter

How to convert DVD and Video to Creative Zen video formats and put/load DVD movies or video to your Creative Zen? You need DVD to Creative Zen Converter and Creative Zen Video Converter software.
Here  recommend you Aiprosoft DVD to Creative Zen Converter and Aiprosoft Creative Zen Video Converter. They can let you convert your DVD movies and general video to Creative Zen formats (Creative Zen AVI, WMV, MPEG, MP3, WMA, WAV) easily.
Now Aiprosoft DVD to Creative Zen Converter Suite is also available, it is the pack of dvd to creative zen converter and creative zen video converter, you can get it at the promotion price.
Part One: How to Rip DVD to Creative Zen.
Step 0: Free download DVD to Creative Zen Converter, install and run it.

Step 1: Load DVD.
Click “Load DVD” to add your DVD contents.
Step 2: Set output video format.
Click “Profile” button from the drop-down list to select the exact output video format that is the most suitable for your iPad. You can click the “Settings” button to set parameters of your output video such as such as Resolution, Video Bitrate, Frame Rate, Audio Channels, Sample Rate, etc. to get the best video quality as you want.
Step 3: Select the output path by clicking “Browse” button from the line of destination.
Step 4: Click the “Go” button to start the conversion.
Tips:
The two pieces of software have some basically editing functions such as trim, crop, effect,
1. Trim:
Three ways to do trim:
a. Drag the “start scissors bar” button to where you want to start and “end scissors bar” button where you want to end.
b. You can click the “Trim From” button when you want to start the trim during your preview and click “Trim To” button when you want to end.
c. Set the exact “start time” and “end time” at right part of the trim window and click “ok”.

2. Crop:
Three ways to do crop
a. Select one crop mode from the “Crop Mode” drop-list.
b. Dragging crop frame to choose your own crop.
c. Set your own crop value.


3. Effect
Drag the adjustment bar to find your favorite effect of Brightness, Contrast, Saturation and Volume.


4. Merge into one file.
Pick the “Merge into one file” to merge the files you choose into one output file.

Part Two: How to Convert Video to Creative Zen.
Step 0: Free download Creative Zen Video Converter, install and run it.

Step 1: Add video File.
Click “Add File” to add your video contents.
Step 2: Set output video format.
Click “Profile” button from the drop-down list to select the exact output video format that is the most suitable for your iPad. You can click the “Settings” button to set parameters of your output video such as such as Resolution, Video Bitrate, Frame Rate, Audio Channels, Sample Rate, etc. to get the best video quality as you want.
Step 3: Select the output path by clicking “Browse” button from the line of destination.
Step 4: Click the “Start” button to start the conversion.

Other software:
DVD to PS3 Converter | PS3 Video Converter | Archos Video Converter | Best DVD Ripper